RESIDENTIAL ASPHALT PAVING SERVICES IN GRAYSLAKE, ILLINOIS
STREAMLINED PERFORMANCE • SUPERB QUALITY
Asphalt Driveways
The view of your driveway is one of the first things people take note of when they come to your property. Whether you are planning to move or stay, be sure to consider your driveway – no outdoor setting is complete without a driveway in good condition. Driveways are a cost-effective solution, constructed to last, and it won’t cost much to upkeep them.
Our promise to you is to provide a sturdy and lasting pavement that is dependable and reliable in the long run. Our driveways are designed to be aesthetically pleasing and of the highest quality. We pride ourselves on the exactness from perimeters and angles to the precise compaction alongside structures and other pavements. The tamping of the edges is a vital component in the strength of the driveway. This furnishes suitable backing against disintegrating sides as well as bestowing your driveway a lovely finished look of direct lines and smooth bends.
Asphalt driveways have been designed with fortitude to withstand the alternating cold and warm temperatures of winter and spring. Asphalt paving projects are simpler and can be done in a shorter amount of time due to the lesser number of steps needed for installation and repairs when compared to concrete.
Asphalt paving projects are simpler and can be done in a shorter amount of time due to the lesser number of steps needed for installation and repairs when compared to concrete.
ASPHALT SERVICES IN GRAYSLAKE
Asphalt Remove and Replace
By completely removing the driveway, the underlying problems in the base can be exposed, thereby, making sure the proper steps are taken to build a driveway that lasts.
What is the ideal time to put in a new Driveway?
If any of these issues are present, a total replacement of your driveway is essential:
- Extensive Cracking
- Settling of the driveway
- Water drainage & pitching problems
- Excessive asphalt crumbling into pieces
- Obvious Potholes
Asphalt Driveway Dig-out / Driveway Extension
Lack parking spaces for your guests, trailer, basketball, boat, or the newest driver in the family? Is the size of your driveway unusually large or irregular?Constructing an extension onto your driveway may be the solution to parking difficulties or nicks for driveways that are too narrow. Our team is able to revamp your driveway, adjust the arrangement, or move it to another part of your estate! It is one of our widely in demad asphalt paving services in Grayslake, Illinois.
When should I do an Asphalt Dig-out?
Whether you need to put in a fresh driveway or add square footage to an current one.
Asphalt Driveway Overstone
If you are struggling with an uneven area, mud and dirt, and a general mess on your gravel drive, it may be necessary to discover how to make the gravel drive steady.
Picking Asphalt Overstone is a wise move as it usually does not necessitate excavation, thus reducing cost.
First we check the level to have the correct grade so that standing water does not accumulate on the ground.
Next, to make a secure foundation, a sub-base will be laid creating a plane that is resilient enough to support the asphalt being placed over it.
In final step we install 3″ asphalt and compact it.
When should I do it?
Overstone is applied when the client already has a gravel base installed.
In any case, our staff must evaluate the heights and augment up to two inches of gravel.
A small scale excavation might be necessary for cleaning.
Services comparison
| Stages | Asphalt Remove & Replace | Asphalt Dig-out / Extension | Asphalt Overstone |
| Excavation | Remove existing asphalt | Dig-out the existing dirt 9” | Minimum |
| CA-6 stone base | Add up to 2” | Complete 6” base | Add up to 2” |
| Shoot grades with laser level and fine grade for water drainage. | |||
| Pave with 3” of asphalt surface and compact | |||
| Pavement will be compacted with a 5-ton vibratory roller and finish roller. | |||
Driveway Overlay/Resurface
A resurfacing is a cost-efficient method of refreshing the look of your driveway if are not concerned about optimal longevity Resurfacing an existing solid driveway should last 7-10 years, but some areas may require spot repair.
Driveways can be resurfaced or “overlayed” with asphalt. The ideal candidate for a overlay is:
- A minimally cracked area.
- The driveway is settled no more than 2″ low below the garage floor or has at least this amount of space from existing pavement to garage floor, city sidewalk, and entrance, and is in satisfactory to fair [shape|condition}.
- The driveway is long and can have sections corrected independently; financial benefit is not usually seen in small driveways as the minimum charge is still applicable.
Other Asphalt Paving Services in Grayslake
Hard-wearing Pavement and a thicker stone for greater loads. (i.e.: boat parking, camper parking, or larger vehicle). For this we recommend 3″ or 4″ of blacktop in two lifts with a gravel base of 8″ or even 12″.
We provide complete or partial basketball, tennis, and pickleball court installations and offer custom striping schemes completed in-house.
Sections that have to be altered or revoked will have their pavement and gravel taken away, and the empty space filled with dirt, topsoil, and seeds.
Installing and fixing asphalt can be less complicated and quicker than installing concrete or brick, since fewer steps are required to finish the job.
ASPHALT PAVING PROCESS
STEP 1.
DEMO & BASE PREPARATION
Upon arrival thethe crew will strip the current surface of the driveway, install the new stone base, flatten, and have it compressed and set for appraisal with the city or village needed.
Generally, the driveway will be available to park on following the base being readied.
STEP 2.
INSPECTIONS
Once the base has been prepared, we will arrange any desired base inspections.
After the inspection has been approved, we will arrange for the installation of the pavement to take place within 1-3 days after the base has been prepared, depending on the weather conditions.
It is usually not necessary for anyone to be present during an inspection in most villages, but the permit must be clearly exhibited on a window or door at the front, and approved plans should be at hand if needed.
In certain Villages, a base inspection is not necessary, and we will alert, paving can happen promptly if available.
STEP 3.
PAVEMENT INSTALLATION
The asphalt crew will finish the driveway by pouring the asphalt and cutting it off to vehicles.
During construction, contact the local police department to acquire permission to park on the street.
CARE AND MAINTENANCE
AFTER PAVING COMPLETION
Follow a straight path when entering and exiting the driveway.
Prevent turning the steering wheel when the vehicle is not in motion or in a solitary area.
Keep sharp objects off the driveway over the course of two days, such as pointed-heels, bicycle kick-stands, roller blades, lawn mowers, or trailers.
Refrain from having cars parked in your driveway for long amounts of time.
Keep from going beyond the edges of the driveway when driving.
During periods of drought, enable water to pass over your driveway to prevent cracking caused by intense dryness.
Seal-coat your driveway no less than 60 days but no more than a year after it has been completed for an optimal curing process
Seal-coat your driveway every year.
SEAL COATING
COAL-TAR OR ASPHALT EMULSION APPLIED OVER ASPHALT SURFACES TO PROTECT FROM DAILY FROM DAILY DESTRUCTIVE FORCES.
1.
Shields against natural elements like sun, snow, ice and salt.
2.
Keeps from the decaying effects of oil, gas, and harmful substances.
3.
Increasing water runoff by filling in the asphalt pores and forming a smooth surface.
4.
Facilitates simpler scrubbing, tidying and upkeep of asphalt.
5.
Refreshes the appearance of any property with a new, black finish to asphalt.
6.
Extending asphalt’s service life and reducing repair costs for economic benefits.
