RESIDENTIAL ASPHALT PAVING SERVICES IN SALEM, WISCONSIN
STREAMLINED PERFORMANCE • TOP_NOTCH QUALITY
Asphalt Driveways
People form an opinion of your property based on the first thing they see when they arrive, your driveway. Whether you’re relocating or staying put, make sure your driveway is taken care of, as it is a key element of any property’s hardscape. Driveways are cost-effective and long-lasting, while also being quite inexpensive to maintain.
We are devoted to supplying you with a robust and durable pavement that will be dependable and reliable in the years to come. Our driveways are designed to be attractive and of premier quality. We specialize in accuracy from sides and angles to the correct loading near structures and other pavements. The tamping of the edges is a major requirement for the strength of the driveway. This offers adequate backing against collapsing borders and awarding your driveway an attractive completed façade of orderly lines and streamlined curves.
Asphalt driveways are engineered with the strength to endure winter freezing and the thawing of spring. Asphalt paving projects can be done in a shorter amount of time as fewer steps are necessary for installation and repairs in comparison to concrete.
In comparison to concrete, asphalt paving projects can be done at a faster rate since fewer steps are needed to complete the installation and repairs.
ASPHALT SERVICES IN SALEM
Asphalt Remove and Replace
By totally removing the driveway, we can find any potential issues that could be existing in the base, thus guaranteeing the right steps are taken to put in a drive that will endure.
When is it necessary to replace my Driveway?
If you detect any of these issues, it is now necessary to totally replace your driveway:
- Thorough Cracking
- Settling of the driveway
- Water drainage & pitching problems
- Excessive asphalt raveling into pieces
- Noticeable Potholes
Asphalt Driveway Dig-out / Driveway Extension
Not enough parking spaces for your guests, camper van, basketball, boat, or the newest driver in the family? Is the size of your driveway too big or oddly shaped?Installing an extension to your driveway could be the fix to parking troubles or door nicks for driveways that are too narrow. We can redesign your driveway, switch up the plan, or transfer it to a separate area of your property! It is one of our widely sought after asphalt paving services in Salem, Wisconsin.
When should I do an Asphalt Dig-out?
Whether you need to initiate a new driveway or add square footage to an current one.
Asphalt Driveway Overstone
If you’re struggling with a gravel driveway that is irregular, messy, mucky and untidy, you may need to contemplate how to make it strong and secure.
Choosing Asphalt Overstone is advantageous as it usually does not necessitate excavation, thus reducing cost.
First, Verifying the levels is necessary to obtain the correct grade and keep the water from accumulating on the ground.
Next, a sub-base will be set up, forming a plane that is sturdy enough to bear the blacktop that will be placed on it.
In final step we install 3″ asphalt and compact it.
When should I do it?
Overstone installed when the client already has a gravel base laid.
In any case, our staff must analyze the measures and boost to a sum of two inches of gravel.
A shallow dig may be compulsory to keep the area clean.
Services comparison
| Stages | Asphalt Remove & Replace | Asphalt Dig-out / Extension | Asphalt Overstone |
| Excavation | Remove existing asphalt | Dig-out the existing dirt 9” | Minimum |
| CA-6 stone base | Add up to 2” | Complete 6” base | Add up to 2” |
| Shoot grades with laser level and fine grade for water drainage. | |||
| Pave with 3” of asphalt surface and compact | |||
| Pavement will be compacted with a 5-ton vibratory roller and finish roller. | |||
Driveway Overlay/Resurface
Resurfacing is an economical approach to giving your driveway a fresh facade without investing in extended life. A typical resurfacing operation done over a trusted existing driveway surface should last approximately 7-10 years, with the exception of needing spot patching in some locations.
Driveways can be resurfaced or “overlayed” with asphalt. The prime candidate for a overlay is:
- A slightly cracked area.
- The driveway is settled no more than 2″ low below the garage floor or has at least this amount of space from current pavement to garage floor, city sidewalk, and entrance, and is in adequate to average [shape|condition}.
- The driveway is long and can have segments fixed independently; it is unlikely that smaller driveways will see any cost advantages due to the minimum payment that has to be made.
Other Asphalt Paving Services in Salem
Sturdier Pavement and a thicker stone for heavier loads. (i.e.: boat parking, camper parking, or bigger vehicle). For this we suggest 3″ or 4″ of blacktop in two lifts with a gravel base of 8″ or even 12″.
Our team is equipped to install full or partial basketball, tennis, and pickleball courts, and we can provide custom striping services in-house.
Parts that need to be altered or annulled will have their existing pavement and gravel taken away, and the leftover space filled with dirt, topsoil, and seeds.
Asphalt installation and repairs can be easier and faster than the set up of concrete or brick, since fewer steps are necessary to complete the project.
ASPHALT PAVING PROCESS
STEP 1.
DEMO & BASE PREPARATION
On their coming, the team will take away the present pavement of the driveway, install the novel stone base, level, and leave it packed down and ready for review with the local village or city as demanded.
In the vast majority of cases, the driveway will be available for parking after the base is completed.
STEP 2.
INSPECTIONS
When the base is ready, we will arrange any requisite base inspections.
When the inspection is passed, the project pavement installation date will be set, usually 1-3 days after the base is ready, provided the weather allows it.
Most villages do not necessitate someone to be present for the inspection, but do require the permit to be visibly posted on the front window or door as well as have approved plans available if necessary.
If a base inspection is not mandatory in certain Villages, we will advise, paving can be done quickly.
STEP 3.
PAVEMENT INSTALLATION
The asphalt workers will finish the driveway by pouring the asphalt and keeping it inaccessible to cars.
When constructing, please contact the local police station for authorization to park on the street.
CARE AND MAINTENANCE
AFTER PAVING COMPLETION
Pull in and out of the driveway in a straight line.
Avoid rotating the steering wheel while the auto is not in operation or in a remote area.
Do not put pointed objects on the driveway in the next two days, like pointed-heels, bicycle kick-stands, roller blades, lawn mowers, or trailers.
Prevent leaving cars in your driveway for extended spans of time.
Keep from going beyond the edges of the driveway when driving.
During dry spells, permit water to run over your driveway to stave off splitting from excessive lack of moisture.
Seal-coat your driveway following a minimum of a 60 day time frame to a year since its completion to give the driveway time to cure.
Seal-coat your driveway yearly.
SEAL COATING
COAL-TAR OR ASPHALT EMULSION APPLIED OVER ASPHALT SURFACES TO PROTECT FROM DAILY FROM DAILY DESTRUCTIVE FORCES.
1.
Stops natural elements including sunlight, snow, ice and salt.
2.
Preserves from the deteriorating effects of petroleum, gas, and dangerous chemicals.
3.
Boosting water runoff by stuffing asphalt pores and constructing a flat surface.
4.
Aids sweeping, cleaning and keeping asphalt in good condition.
5.
Gives a black finish to asphalt to increase the attractiveness of any property.
6.
Enhancing the longevity of asphalt already in place and saving money on repair expenses.
