RESIDENTIAL CONCRETE PAVING IN PLEASANT PRAIRIE, WISCONSIN
STREAMLINED PERFORMANCE • SUPREME QUALITY
Concrete Driveways, Walkways, Stoops, and Patios
Solidify the allure of your home with a concrete driveway, as it not only enhances its overall appeal but also provides a sturdy investment that pays off over time. With proper installation and regular maintenance, a concrete driveway can easily surpass the 20-year mark while requiring minimal upkeep expenses. Additionally, by choosing to color and stamp your concrete, you can infuse your driveway with a sense of individuality and charm that sets it apart from the rest.
Pros of concrete
- Installing concrete correctly significantly extends its lifespan, resulting in reduced maintenance needs over time.
- Has a long lifespan.
- While concrete driveways require minimal upkeep, it’s advisable to reseal them every 3-5 years to preserve their condition, considering care and the amount of daily use.
- Better in warm climates as it does not soften.
- Can be colored and scored.
CONCRETE PAVING SERVICES
CONCRETE EXTENSIONS & WIDENING
Concrete Driveways & Garage Floors
When extending a concrete driveway according to usual standards, it involves removing and disposing of 9 inches of dirt, incorporating 4 inches of CA-6 stone, wire mesh reinforcement, and finally pouring a 5-inch layer of concrete.
When aiming for reliable and long-lasting Concrete Paving in Pleasant Prairie, Wisconsin, it is recommended to construct driveways with a minimum specification of 4 inches of CA-6 stone, wire or fiber mesh reinforcement, and a final layer of 5 inches of concrete.
The profile of the Concrete Garage Floor closely resembles that of the driveway, offering a consistent and cohesive look. Additionally, decorative concrete coatings can be applied to enhance its aesthetic appeal and infuse it with distinctive character.
To allow for adequate expansion and contraction, expansion joints are strategically positioned at the intersection of the newly installed concrete and the pre-existing concrete, such as where the driveway and the garage base converge.
Opting for a six bag mix of Concrete with a strength rating of 4,000 PSI is of utmost importance to ensure that your Concrete Paving in Pleasant Prairie, Wisconsin achieves the highest level of strength possible.
Concrete Walkways
In most areas, walkways are typically 3 feet wide, with the front walkway being wider in size. To install a walkway, it is customary to prepare a base layer of 4 inches of CA-6 stone, followed by a 4-inch layer of concrete for the walkway.
To ensure durability and stability, it is recommended to establish private walkways using a 4-inch base layer of CA-6 stone, topped with a 4-inch layer of concrete.
The preferred method for constructing city walkways involves a sturdy base layer of 4 inches of CA-6 stone, followed by a 5-inch layer of concrete for enhanced durability.
When it comes to the City Approach, the thickness of this segment, located between the city walk and the road, can differ based on the village, often ranging from a thickness of 6 inches or more of concrete.
Concrete Stoops and Steps
To eliminate trip hazards and provide a comfortable step down, concrete stoops and steps can be extended and widened as required. Concrete Paving in Pleasant Prairie, Wisconsin is executed by our team with meticulous attention to detail. We strictly adhere to the recommended 7-inch depth for steps, while also ensuring full compliance with village codes and typical engineer specifications. This commitment guarantees precise and accurate results.
In many cases, concrete stoops can be enhanced by overlaying or “capping” them with pavers or natural stone, providing a more sophisticated and elegant appearance. When it comes to the front entrance, it is not unusual to opt for pavers or stone, like bluestone or flagstones, to create a distinct visual effect, while the surrounding areas are poured with concrete.
Saving money can be accomplished by leveling the concrete stoop using mortar or screenings and subsequently overlaying it with brick pavers or natural stone, circumventing the need for a costly stoop replacement.
Concrete Patios
Concrete patios have emerged as one of the leading services in our Concrete Paving offerings in Pleasant Prairie, Wisconsin, driven by their widespread appeal and versatility. With a wide range of patterns, colors, and stamps available, your patio can serve as a reflection of the overall style of your property.
While it is possible to expand a small patio by adding new concrete, it is generally more desirable to redo the entire patio to ensure a uniform and seamless look.
CONCRETE PAVING PROCESS
STEP 1.
DEMO, BASE & FRAME
When our team arrives, their initial task will involve removing the existing surface of your driveway or patio. Following this, they will meticulously install a new stone base, precisely grading and compacting it for optimal results. The work will be prepared for inspection with the local village or city, ensuring compliance with the necessary regulations.
Whenever it is feasible, we prioritize completing the framing either on the same day or the following day to expedite the pre-pour inspections.
It is crucial to understand that after the base and frames have been prepared for Concrete Paving in Pleasant Prairie, Wisconsin, it will be essential to avoid parking vehicles on the designated area.
STEP 2.
INSPECTIONS
After the base has been prepared for your Concrete Paving project in Pleasant Prairie, Wisconsin, we will coordinate the scheduling of any necessary base inspections to ensure the quality and integrity of the project.
Upon the successful completion of the inspection, we will coordinate the scheduling of the project pavement installation. Typically, this installation is planned to occur within a timeframe of 1-3 days after the base preparation has been completed, taking weather conditions into account.
In most villages, there is typically no requirement for someone to be present during the inspection. However, it is essential to comply with the regulation of visibly posting the permit on a front window or door, and keeping the approved plans accessible if they are requested.
In certain Villages, a base inspection may not be required. In such cases, we will inform you if a base inspection is not needed. If that is the case, we will expedite the scheduling of the paving process based on the earliest available slot.
STEP 3.
CONCRETE INSTALLATION
The skilled team of concrete installers will efficiently carry out the paving work. They will pour the fresh cement, allowing for the inclusion of color as per your preference. The team will ensure the cement is evenly distributed, resulting in a flat and consistent surface. If required, they will employ stamping techniques and apply a release layer to create appealing textures and finishes.
For your convenience, it is recommended to contact your local police department and request a street parking permit for the duration of the construction.
Allowing the concrete to set undisturbed is essential for its long-term performance. It is advisable to wait for a minimum of 5-7 days before parking vehicles on the concrete surface.
WHEN DO I NEED TO REPLACE?
IF YOU NOTICE ANY OF THE FOLLOWING ISSUES:
DEEP PENETRATING CRACKS
EXCESSIVE PITTING (APPEARS AS THOUGH PIECES OF STONE ARE EXPOSED OR MISSING)
EXPOSED RE-BAR OR WIRE MESH
SLABS SETTLED, SLANTED, UNEVEN, OR RAISED
WATER SEEPING INTO THE FOUNDATION OR UNDER THE DRIVEWAY
MAJOR GAPS BETWEEN SLABS AND WHERE CONCRETE USE TO MATCH OTHER SURFACES
DECORATIVE CONCRETE PAVING IN PLEASANT PRAIRIE
THE MOST POPULAR USES FOR RESIDENTIAL CONCRETE
Exposed aggregate concrete
Exposed aggregate concrete offers a remarkably appealing and straightforward approach to achieving a visually captivating and decorative surface.
The act of deliberately stripping away the outer layer of concrete, such as that found on driveways or interior floors, unveils an exquisite arrangement of aggregates, showcasing their diverse sizes and lending a distinctive and captivating appeal to the surface.
Exposed Aggregate Concrete Applications:
- Garage Floor Coating
- Concrete Steps and Stairs
- Concrete Driveways
- Concrete Patios
Stamped Concrete
Stamped concrete offers a fantastic alternative for achieving the look of low-maintenance pavers or natural stone, utilizing patterns and colors to create an appealing and durable surface. It is a popular choice for patios, sidewalks, and driveways.
Stamped concrete has emerged as a favored option for homeowners and contractors, offering an affordable alternative to using costly materials while still achieving a visually stunning and sophisticated finish.
By combining specific coloring methods with intricate stamping patterns, stamped concrete successfully imitates the look of brick or stone tiles, making it a favorable choice for cost-conscious individuals who desire a similar aesthetic.
Stamping concrete requires the expertise of concrete professionals, as they possess the specialized skills to complete the staining and stamping procedures before the poured concrete sets and becomes rigid. After the concrete attains its optimal plasticity, a careful application of a release layer is performed to accentuate the desired color contrasts and facilitate the seamless maneuvering of the stamping tools, preventing them from sticking to the concrete. After the stamping process is finalized, the surface is treated with a curing compound and sealer, which act as crucial safeguards, fortifying the concrete and increasing its durability.
Although the ideal time to stamp concrete is when it is freshly poured and wet, overlays offer a viable solution by incorporating a layer of 2 inches of fresh concrete. This means that if your current concrete is still in good shape, you can effortlessly transform your existing flat driveway or patio with a stunning stamped design that will rejuvenate the entire area.
STAMP COLOR SIMULATOR
CUSTOMIZE, VISUALIZE & MAKE A BETTER CHOICE
1. Choose a Pattern
ASHLER STONE
CANYON STONE
FRACTURED SLATE
LONDON SLATE
VERMONT SLATE
2. Pick a Color
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
