RESIDENTIAL CONCRETE PAVING IN WIND LAKE, WISCONSIN
STREAMLINED PERFORMANCE • UPSTANDING QUALITY
Concrete Driveways, Walkways, Stoops, and Patios
Solidify the allure of your home with a concrete driveway, as it not only enhances its overall appeal but also provides a sturdy investment that pays off over time. When handled with care during installation and routine maintenance, a concrete driveway can easily surpass the two-decade mark, boasting low maintenance costs throughout its life cycle. Moreover, the option to add color and stamping to your concrete allows you to create a truly customized driveway, tailored to your specific taste and preferences.
Pros of concrete
- Installing concrete correctly significantly extends its lifespan, resulting in reduced maintenance needs over time.
- Has a long lifespan.
- Despite being a low-maintenance option, concrete driveways may need periodic resealing every 3-5 years to ensure optimal performance, considering care and everyday use.
- Better in warm climates as it does not soften.
- Can be colored and scored.
CONCRETE PAVING SERVICES
CONCRETE EXTENSIONS & WIDENING
Concrete Driveways & Garage Floors
When carrying out a standard concrete driveway extension, it is customary to remove and dispose of 9 inches of dirt, then proceed with the inclusion of 4 inches of CA-6 stone, wire mesh reinforcement, and a final layer of 5 inches of concrete.
When aiming for reliable and long-lasting Concrete Paving in Wind Lake, Wisconsin, it is recommended to construct driveways with a minimum specification of 4 inches of CA-6 stone, wire or fiber mesh reinforcement, and a final layer of 5 inches of concrete.
Similar to the driveway, the Concrete Garage Floor possesses an equivalent profile, ensuring visual consistency throughout the property. Additionally, the incorporation of decorative concrete coatings opens up possibilities for adding charm and individuality.
Expansion joints are strategically placed at the precise location where the new concrete intersects with the old concrete, allowing for necessary movement and accommodating potential shifting. This is specifically essential where the newly constructed driveway meets the existing garage base.
Employing a six bag mix of Concrete with a strength of 4,000 PSI is imperative to attain maximum durability and strength for your Concrete Paving project in Wind Lake, Wisconsin.
Concrete Walkways
In most areas, walkways are typically 3 feet wide, with the front walkway being wider in size. To install a walkway, it is customary to prepare a base layer of 4 inches of CA-6 stone, followed by a 4-inch layer of concrete for the walkway.
To ensure durability and stability, it is recommended to establish private walkways using a 4-inch base layer of CA-6 stone, topped with a 4-inch layer of concrete.
City walkways are best built using a solid base of 4 inches of CA-6 stone, topped with a 5-inch layer of concrete to ensure longevity and stability.
When considering the City Approach, the thickness of this area, which lies between the city walk and the road, can differ from village to village, commonly requiring 6 inches or more of concrete.
Concrete Stoops and Steps
To enhance safety and convenience, concrete stoops and steps can be extended and widened to eliminate any potential trip hazards and provide a comfortable stepping area. When it comes to Concrete Paving in Wind Lake, Wisconsin, precision is paramount. By adhering to a 7-inch depth for steps, as outlined by industry standards, and strictly complying with village codes and typical engineer specifications, we guarantee precise and accurate results.
By choosing to overlay or “cap” concrete stoops with pavers or natural stone, it is possible to achieve a more upscale and sophisticated design, elevating the overall aesthetic. Placing emphasis on the front entrance is frequently accomplished by incorporating pavers or stone, such as bluestone or flagstones, while the remaining sections are constructed with concrete.
By using mortar or screenings to level the concrete stoop and then overlaying it with brick pavers or natural stone, it is possible to achieve significant cost savings compared to a full stoop replacement.
Concrete Patios
When it comes to Concrete Paving in Wind Lake, Wisconsin, our concrete patio installations stand out as one of our most sought-after services, preferred by many clients. By offering an abundant selection of patterns, colors, and stamps, we ensure that your patio becomes a personalized space that aligns with the style and character of your entire property.
Should you find your patio to be too small, extending it with new concrete is an option. However, for a consistent and cohesive appearance, it is usually advisable to redo the existing patio.
CONCRETE PAVING PROCESS
STEP 1.
DEMO, BASE & FRAME
Upon our arrival, our skilled crew will promptly begin by removing the existing surface of your driveway or patio. Following this, they will proceed with the installation of a new stone base, diligently grading and compacting it to prepare it for inspection by the local village or city, ensuring compliance with the necessary regulations.
Our goal is to frame the structure on the same day or the following day, whenever feasible, to facilitate the necessary pre-pour inspections.
Please take into consideration that once the base and frames are ready for Concrete Paving in Wind Lake, Wisconsin, parking vehicles on the designated area will not be viable.
STEP 2.
INSPECTIONS
Upon completing the base preparation for your Concrete Paving project in Wind Lake, Wisconsin, our next step will be to schedule any necessary base inspections.
Upon successful completion of the inspection, we will proceed to schedule the installation date for the project pavement. Typically, this installation date falls within a range of 1-3 days after the base has been prepared and is ready for paving, taking into account weather conditions.
Generally, in most villages, there is no requirement for someone to be present during the inspection. However, it is crucial to visibly display the permit on a front window or door, and keep the approved plans accessible if they are needed.
It is important to note that some Villages may not necessitate a base inspection. If we determine that your project falls under this category, we will inform you promptly and make arrangements to schedule the paving process at the earliest suitable time.
STEP 3.
CONCRETE INSTALLATION
The skilled team of concrete installers will efficiently carry out the paving work. They will pour the fresh cement, allowing for the inclusion of color as per your preference. The team will ensure the cement is evenly distributed, resulting in a flat and consistent surface. If required, they will employ stamping techniques and apply a release layer to create appealing textures and finishes.
To avoid any inconvenience, we suggest contacting your local police department and acquiring a street parking permit for the duration of the construction.
It is essential to give the concrete sufficient time to set before parking vehicles on it. A minimum of 5-7 days should be observed to ensure the concrete’s stability and longevity.
WHEN DO I NEED TO REPLACE?
IF YOU NOTICE ANY OF THE FOLLOWING ISSUES:
DEEP PENETRATING CRACKS
EXCESSIVE PITTING (APPEARS AS THOUGH PIECES OF STONE ARE EXPOSED OR MISSING)
EXPOSED RE-BAR OR WIRE MESH
SLABS SETTLED, SLANTED, UNEVEN, OR RAISED
WATER SEEPING INTO THE FOUNDATION OR UNDER THE DRIVEWAY
MAJOR GAPS BETWEEN SLABS AND WHERE CONCRETE USE TO MATCH OTHER SURFACES
DECORATIVE CONCRETE PAVING IN WIND LAKE
THE MOST POPULAR USES FOR RESIDENTIAL CONCRETE
Exposed aggregate concrete
When it comes to creating a beautifully adorned surface, exposed aggregate concrete is an immensely appealing and uncomplicated choice.
Stripping away the topmost layer of a concrete surface, whether it be a driveway or an interior floor, reveals a captivating display of aggregates in different sizes, resulting in a truly unique appearance.
Exposed Aggregate Concrete Applications:
- Garage Floor Coating
- Concrete Steps and Stairs
- Concrete Driveways
- Concrete Patios
Stamped Concrete
Stamped concrete provides an excellent alternative to achieve the aesthetic appeal of pavers or stone, while offering the advantage of minimal maintenance. Its versatility in replicating patterns and colors makes it a popular selection for patios, sidewalks, and driveways.
When it comes to achieving a sophisticated and upscale look, stamped concrete serves as a highly popular choice, offering a cost-effective alternative to using other more expensive materials.
Stamped concrete’s ability to replicate the look of brick or stone tiles is achieved through expert coloring and precise stamping, providing homeowners with a cost-effective way to achieve their desired aesthetic.
Stamping concrete is a meticulous undertaking that necessitates the expertise of concrete professionals, who have the necessary skills to perform the staining and stamping techniques before the poured concrete cures and becomes rigid. Once the concrete achieves its desired plasticity, a precise and even application of a release layer is executed to amplify the visual impact by emphasizing color contrasts and ensuring smooth movement of the stamping tools without any adhesion to the concrete. Following the completion of the stamping process, a meticulous application of a curing compound and sealer is carried out, delivering vital protection and enhancing the overall performance and appearance of the concrete.
While it is indeed best to stamp concrete when it is freshly poured and in a wet state, overlays provide an alternative option by adding a layer of 2 inches of fresh concrete. This means that even if your existing concrete is still in good condition, you can easily enhance your current flat driveway or patio by introducing a stamped design that will breathe new life into the space.
STAMP COLOR SIMULATOR
CUSTOMIZE, VISUALIZE & MAKE A BETTER CHOICE
1. Choose a Pattern
ASHLER STONE
CANYON STONE
FRACTURED SLATE
LONDON SLATE
VERMONT SLATE
2. Pick a Color
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
- Spring Beige
- Summer Beige
- Autumn Beige
- Winter Beige
- Porcelain Gray
- Sorrento Red
- Cool Gray
- Sunbaked Clay
- Brownstone
- Desert Sand
- Limestone
- Sombrero Buff
- Antique Cork
- Mesa Beige
- Adobe Tan
- Coachella Sand
- Westwood Brown
- Tawny Pink
- Coral Red
- Quarry Red
- Shadow Slate
- French Gray
- Charcoal
- Dark Gray
